RF Controllers

EP-2808-1ZRC-RF REMOTE & DECODER (1 ZONE)

• • 4 Operating Voltage: 3VDC (Battery Included)
  • Operation frequency:433.92MHZ
  • 10 control functions
  • Overload protection
  • 3 channels
  • Operation voltage: 12-36VDC
  • Operation max current: 3ch x 5A
  • Output power: 3ch x (180-540W)
  • 10 Fading effects programs with selectable speed control: From 2 seconds to 8.5 minutes.
  • Create your own color by using the adjustable color levels on each channel.
  • Choose different colors by using the Rainbow picker function.
  • Easily select from 7 predefined colors (Red-Blue-Green-Orange-Yellow-Cyan-Purple).
  • Create 3 tones of white light: Warm White, Daylight White and Cold White.
  • 256 levels of brightness levels.
  • Smooth and even color fading programs without any flickering.
  • Slender and silky hand held wireless RF remote controller with powerful on-board functions.
  • Enabled to pause at any color during color changing modes.
  • Individual color buttons allow separate smooth color adjustments of each color.
  • Receiver can work as master or slave for simple or complex installations.

Specification Manual Sell Sheet

EP-2809-2Z RF REMOTE & DECODER (2 ZONE)

RF Touch RGB remote controller is a wireless color controlling system that consists of a sender and a receiver or several receivers, as shown in Figure 1, 2: By selecting switch status, you can set the system as RGB 3-channel output, or RGBW 4-channel output. Using RF Touch RGB remote controller, you can get whatever color you want; you can choose any color from RGB(W) to adjust so as to mix more than 100 million kinds of colors. With built-in 1 kind of color changing mode, you can easily switch color changing modes and adjust speed and brightness. “Function Pause” enables RGB LED to stay at your favorite color under the situation of color changing modes.

Specification Manual Sell Sheet

EP-2810-4Z-RC RF REMOTE & DECODER (4 ZONE)

• Control up to 4 different zones individually or in group
• Create your own color transitions for each zone
• Control saturation levels for each color or Zone
• Turn ON/OFF each Zone individually or in group
• Dim 0-100% each zone individually
• Recall saved programs easily
• Control brightness and saturation levels for each zone
• Control Program speed on each zone
• Use the Color Wheel function to set colors easily
• Each zone can have up to 10 different steps of color effects
• 10 Pre-programed color changing effects included
• Wireless transmission up to 100 feet away
• Color Touch wheel
• 3 X AAA batteries required
• 430Mhz Transmission protocol
• Auto shut off after 10 seconds

Specification Manual Sell Sheet

EP-2810-10Z-RC RF REMOTE & DECODER (10 ZONE)

• User-friendly interface, easy and simple operation.
• Operation return function.
• Control up to 4 zones.
• Set 4 scenes at each zone.
• Preset 10 changing modes, with pause function.
• Synchronization function of pattern changes ensure consistent change forever.
• Control synchronously after installing software on iphone, ipad, android.
• Enable to dim brightness of each R, G, B, W channel, in order to mix millions of colors. Enable to dim brightness of each R, G, B, W channel, in order to mix millions of color.

Specification Manual Sell Sheet